Kia sedona 2015 Manual page 528

WARNING -
HID Headlamp low beam
(if equipped)
Do not attempt to replace or
inspect the low beam (XENON
bulb) due to electric shock dan-
ger. If the light bulb does not
operate, have your vehicle
checked by an authorized Kia
dealer.
Headlamp (bulb type) -high/low
Low lamp
High lamp
I n f o r ma t i o n P r o v i d e d b y :
1. Open the hood.
2. Remove the front cover(1) and
headlamp assembly nuts(2).
3. Remove the headlamp assembly
from the body of the vehicle
4. Remove the headlamp bulb cover
by turning it counterclockwise.
5. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
OYP074068N
the socket align with the slots on
the assembly.
6. Remove the bulb by pulling it out.
7. Inset a new bulb by inserting it into
the socket.
8. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
OYP074069N
Push the socket into the assembly
and turn the socket clockwise.
9. Install the headlamp bulb cover by
turning it clockwise.
OYP074055N
Maintenance
7 75