Kia sedona 2015 Manual page 218

To flash the headlights, pull the lever
towards you. It will return to the nor-
mal (low beam) position when
released. The headlight switch does
not need to be on to use this flashing
feature.
High Beam Assist (if equipped)
OKH042193
The High Beam Assist is a system
that automatically adjusts the head-
lamp range (switches between high
beam and low beam) according to
the brightness of other vehicles and
road conditions.
I n f o r ma t i o n P r o v i d e d b y :
Features of your vehicle
Operating condition
1.Place the light switch in the AUTO
position.
2.Turn on the high beam by pushing
the lever away from you.
The High Beam Assist (
tor will illuminate.
3.The High Beam Assist will turn on
when vehicle speed is above
45km/h (24.8mph).
• If the lever is pushed away when
the High Beam Assist is operat-
OKH042195
ing, the High Beam Assist will
turn off and the high beam will be
on continuously. The High Beam
Assist ( ) indicator will turn off.
• If the lever is pulled towards you
when the High Beam Assist is
operating, the High Beam Assist
will turn off.
4.If the light switch is placed to the
headlamp position, the High Beam
Assist will turn off and the low
beam will be on continuously.
) indica-
4 125