Table of Contents
Advertisement
Setting the volume
[6] Raise the volume.
➨
[8] Lower the volume.
➥
Setting the feed alert/time
You can set a feed alert/time to be sounded at a specific time or at specific intervals.
If you set a feed alert/time to be issued at intervals, ensure that the date and time are set correctly.
Setting the feed time
Example: 12.30 p.m.
[9] Feedtime
➨
[5]
➨
Setting the feed alert at an interval
Example: 2 hours 30 minutes
[9] Feedtime
➨
[5]
➨
Activating the feed alert at intervals
[9]
Feedtime
➨
Deactivating the feed alert at intervals
[9]
Feedtime
➨
Setting the volume of the feed alert
[9]
Feedtime
➨
The feed alert can be stopped by pressing any button on the receiver unit.
PAGING
If you have misplaced the receiver unit and cannot find it, simply use the Paging function. The
receiver unit then issues a loud acoustic signal.
On the transmitter unit
➨ 5 sec.
[20] The receiver unit issues a loud acoustic signal.
The acoustic signal can be stopped by pressing any button on the receiver unit.
Voice activation
The voice activation facility (Vox function) is activated by default. As soon as the transmitter unit
registers acoustic signals, they are transmitted to the receiver unit.
SetTime
Hour / Minute ➥ Define the setting (12.30).
SetTime
Set Interval ➥ Define the setting (2 hours 30 minutes).
SetInterval
On? ➥ Feed alert is activated.
SetInterval
Off? ➥ Feed alert is deactivated.
SetInterval
High / Low
MODEL RA4232
7
Advertisement
Table of Contents
