Table of Contents
Advertisement
user manual
NIGhT-LIGhT
The transmitter unit is equipped with an integrated night-light [18].
[9] Nightlight<?> On?<?>
i
If you deactivate the Nightlight<?>, the TempAlert<?> function is also deactivated.
IN CASE Of PROBLEMS
1.
The transmitter unit does not transmit any signals.
►
The sensitivity of the noise activation is set to too low a level. Increase the sensitivity in the
corresponding menu.
►
The batteries are weak or the power adapter plug is not connected properly. Connect the
transmitter unit with the power adapter plug to a properly installed power socket.
2.
The transmitter unit transmits sounds continuously.
►
The sensitivity of the noise/motion activation is set to too high a level. Lower the sensitivity in the
corresponding menu.
3.
The batteries in the receiver unit are discharged after a short time.
►
Transmission of sounds is activated continuously. Adapt the settings to save the batteries.
►
The batteries are defective/damaged. Contact your sales outlet for new batteries.
4.
Short range.
►
There are too many walls or other electrical appliances between the receiver and transmitter
units.
►
Move the location of the receiver and transmitter units.
►
The batteries in the transmitter unit are weak or the power adapter plug is not connected
properly. Connect the transmitter unit with the power adapter plug to a properly installed
power socket.
MAINTENANCE
►
Clean the surface of the housing with a soft, fluff-free cloth.
►
Do not use any cleaning agents or solvents.
10
Advertisement
Table of Contents
