Table of Contents
Advertisement
user manual
TRANSMITTER UNIT
16
Loudspeaker
17
Operating indicator
18
Night light
19
button (switch on/off)
20
button (paging)
21
Power adapter socket
22
Thread for base
23
Battery compartment
24
Screw for battery compartment cover
PUTTING ThE RECEIVER UNIT INTO OPERATION
Inserting batteries in the receiver unit
►
Slide the battery compartment cover on the
rear downwards and remove it.
►
Insert the batteries in the battery compartment,
paying attention to correct polarity.
►
Close the battery compartment cover.
Charging the batteries
Connect the power adapter plug to the power adapter
socket [15] on the receiver and a properly installed mains
power outlet and insert the receiver unit in the charger.
i
The batteries must be charged for at least 8
hours before being used for the first time.
Switching the receiver unit on/off
►
5 sec.
►
5 sec.
Operating and charging indicators on the receiver unit
Operating/Charging indicator [2] lights up ➥ The receiver unit is switched on.
Operating/Charging indicator [2] flashes ➥ Batteries are being charged.
4
[4] ➥ Receiver unit is switched on.
[4] ➥ Receiver unit is switched off.
Advertisement
Table of Contents
