Exposure XXII Quick Start Manual

Thank you for purchasing the Exposure CD Player XXII.
Designed to offer the finest musical performance,
the XXII will provide endless hours of pleasure for the
discerning music enthusiast.
Before you start
Contents:
Exposure CD Player XXII
Mains cable HS-100 Exposure System
remote control
(batteries included)
Please note that your Exposure CD Player XXII may
take up to 48 hours to "run-in" before reaching its
optimal performance. Each subsequent "run-in"
will then take about 30 minutes.
1
Installation
a) Connect the mains cable to
the IEC mains input socket.
2 Amplifier Connection
The Exposure CD Player XXII is fitted with both analogue and
digital audio outputs. Please use your own preferred cables.
The Exposure CD Player XXII: Back View
Analogue Output
• Connect RCA Phono sockets to appropriate
line input on the amplifier.
• Make sure right and left channels are
properly connected.
(Right channel is marked in red)
3 Operation
Ensure that your amplifier volume control is set to minimum.
The Exposure CD Player XXII: Front View
The LED power indicator will light up.
Press power switch.
b) Connect to the mains outlet on the
wall. DO NOT switch on until all input
and output connections are made.
Digital Output
Connect the digital outputs either to:
• An external digital to analogue
converter,
or
• To a digital device such as a CDR
machine or minidisc recorder.
(For hints on improving sound quality, please refer to
"Extended Set-Up" overleaf)
The display will illuminate.
4
Function Controls
Open Opens and closes the CD loading drawer.
Stop Stops disc playback.
Play/Pause Starts disc playback.
Pressing Play/Pause while a disc is
playing will pause playback.
Pressing Play/Pause again will resume
playback.
|<< Selects the previous track in sequence.
>>| Selects the next track in sequence.
Display Press once to turn display off. The
display will stay off until another
button is pressed, and it will then go
off again after a short delay. Press
Display again to turn it back on.
5
Remote Control
Press the black CD button on the remote control first in
order to use the grey function buttons.
1~ 9,+10 Direct access track
functions
Display Press once to turn
display off. The display
will stay off until
another button is
pressed, and it will
then go off again after
a short delay. Press
Display again to turn it
back on.
PROG Programmable track
selection.
RANDOM Random track selection.
TIME Track time countdown.
RPT Track/disc repeat.
|<< Selects the previous
track in sequence.
>>| Selects the next
track in sequence.
Open Opens and closes the
CD loading drawer.
Stop Stops disc playback.
Play/ Starts disc playback.
Pause Pressing Play/Pause
while a disc is playing
will pause playback.
Pressing Play/Pause
again will resume
playback.