Status Command - Cashinotech CSN-A2 User Manual

CSN-A2 Micro panel thermal printer
Description : Initializes the printer.
� The print buffer is cleared.
� Reset the parametric to default value.
� return to standard mode
� Delete user-defined characters
5.2. 5.2. 5.2.7 7 7 7 Status Status Status Command Command
5.2.

Status Command

Command
ESC ESC ESC v v v v n n n n
ESC Transmit paper sensor status
Format:
Description: Transmit board status to host
Return:
P<Paper>V<Voltage>T<Degree>
Example:P1V72T30 Mean:Paper Ready,Current voltage 7.2V,Printer degree:30
GS GS GS GS a a a a n n n n Enable/Disable Automatic Status Back(ASB)
Format:
Description: n definition as follows:
When ASB is enabled, the printer will send the changed status to
PC automatically.
ESC ESC ESC ESC u u u u n n n n
Format:
Description: This command is not supported.
Return status bytes definition:
bit0: Drawer status.
bit4: 0
Always return 0 back
Hexadecimal: 1B 40
ASCII: ESC v n
Decimal: 27 118 n
Hexadecimal: 1B 76 n
ASCII: GS a n
Decimal: 29 97 n
Hexadecimal: 1D 61 n
Bit Function
0 0
1
2 Disable/Enable ASB
3-4
Disable/Enable
5
as flow control
6-7
ASCII: ESC u n
Decimal: 27 117
Hexadecimal: 1B 75
Value
0
Disable
RTS
Disable
Transmit peripheral devices status
1
Enable
Enable
20/26