Setup; Lock - Naxa NT-70 Instruction Manual

4. Time Format: Display the time as 12 or 24 hours.
5. Auto Sync: Set the system time to match the time
carried by the antenna signal (cable or air). This op-
tion is not adjustable. The TV must be connected to
an antenna or cable system for Auto Sync to work.
6. Clock: Set the system time.

Setup

1. Menu Language: Set the display language of on-
screen menus.
2. Transparent: Set the transparency level of the on-
screen menus.
3. Closed caption: When closed caption is available
for a TV program, a synchronized transcript of the
program can be displayed on screen.
• Select Off to never display the closed caption
information.
• Select On to always display the closed caption
information.
• Select CC on Mute to only display the closed
caption information when MUTE is enabled.
Page 14
• Change how closed caption information is dis-
played (CC1, CC2, CC3, CC4, Text1, Text2, Text3,
Text4).
4. Restore default: Return all options to their factory
default setting.
5. Setup Wizard: An on-screen guide that will help you
get your TV up and running. Set the menu language,
time zone, DST, and time format. Then, it scans all
the channels to find all stations within broadcast
range.

Lock

Use the remote control to enter the default password
(0000) to access the Lock options.
1. Change password: Set a new password. When you
change the password, write it down and store it
safely. Resetting the factory options will not reset
the password.
2. System Lock: Set to ON to prevent channels and
program types from being viewed.
3. Input Block: Completely block the TV mode or the
Naxa Electronics