Setting The Input Source; Adjusting The Volume; Using The Number Keypad; Tv Menu Operation - Naxa NT-70 Instruction Manual

Setting the Input Source

Set the input source to choose which connection is ac-
tive and displayed on the TV screen.
Press MODE [2] to access the input source menu, then
press CH or CH [8, 9] to change the input source.
Press OK [3] to confirm the selection.

Adjusting the Volume

• Use the VOL and VOL keys [11, 12] to increase or
decrease the volume level, respectively.
• Press the MUTE key on the remote to disable sound
output completely. Press the MUTE key again to
restore sound output.

Using the Number Keypad

Use the number keypad (0-9) on the remote to tune di-
rectly to a channel or to input a value when prompted
on a menu or option screen.
To tune to channel 15-1, for instance:
1. Press the "1" key, then press the "5" key.
Page 12
2. Press the "--/-" key.
3. Press the ENTER key.
To go to track 15, for instance:
1. Press the "1" key, then press the "5" key.
2. Press the ENTER key.

TV Menu Operation

Press the MENU key to access the menu list and then
press the RIGHT arrow key to enter the list. Press the
CH /CH arrow keys to browse menu options; press
the VOL /VOL arrow keys to adjust the selected menu
option and then press the MENU key to confirm the
change.
To exit the menu, press the MENU key to back out of all
menu options.
Naxa Electronics