Table of Contents
Advertisement
CRU-WiebeTech
2.4 Forensic RTX410-QJ Host Connections
Connect the eSATA, FireWire or USB cable from the computer into the port on the Forensic RTX410-QJ.
2.5 Connecting Forensic RTX410-QJ to your Computer
Plug in the data cables and power cord. The Forensic RTX410-QJ connects to your computer through
FireWire, eSATA or USB. Each drive has its own dedicated connection for maximal data speeds. Plug
one end of each cable to the back of the unit. Insert the other end into an open port on the computer.
2.6 Daisy Chaining
If daisy-chaining, join all four bays together using three FireWire cables. Connect a fourth FireWire cable
to one of the remaining open FireWire ports on the back of the Forensic RTX. Plug the other end of that
cable into an open FireWire port on the computer. Be sure to label your drives in such a way that you'll
know which one you're accessing on the computer.
Your product is now ready to use! Turn on the power switch on the back of the unit. If your target drives
are already formatted, you can begin using them right away. Otherwise you can format them at this time
to prepare them for usage with your computer. For obvious reasons, drives in the write-blocked bays
cannot be formatted.
F o r e n s i c R T X 4 1 0 - Q J U s e r M a n u a l ( A9 - 4 1 0 - 0 0 0 1 )
R E V 1 . 0
eSATA
USB
FireWire cables
FireWire 800
- 7 -
Advertisement
Table of Contents
