Troubleshooting - Freestyle FS-80 NG Instruction Manual

W
FreeStyle
ALL

32 Troubleshooting

VERIFY PROPER OPERATION AFTER SERVICING VERIFY PROPER OPERATION AFTER SERVICING
FreeStyle
the " ™
" (page 120). Record the boiler size and CP
jacket).
Failure to adhere to these guide-
ELECTRICAL SHOCK HAZARD
. Internal wiring is still powered when
DO NOT JUMPER DEVICES
mentary testing.
REINSTALL Jacket door
inside the boiler room. This is particularly important
tened could result in severe personal injury or death.
BEFORE SERVICING or
MAKING CONNECTIONS —
LABEL WIRES BEFORE
REMOVING
Label all wires prior to disconnection when servic-
ing controls. Wiring errors can cause improper and
dangerous operation.
Part number 550-142-850/0115
M -
OUNT GAS FIRED WATER BOILER
-
-
-
-
—
Boiler Manual
BEFORE TROUBLESHOOTING — BEFORE TROUBLESHOOTING — BEFORE TROUBLESHOOTING — BEFORE TROUBLESHOOTING —
1.
to boiler.
FreeStyle
2. Check the ™
3. See Figure 72, page 56
TS Flashing (parameter)
Push heating – button
Push heating – button
Push "Reset" once
page 80.
Figure 101
Tool
Remove heat exchanger cover plate
Remove burner screws
For gas valve adjustment
Combustion testing and boiler adjustments
pipes
Check the following:
1.
controls are either installed (and closed) or temporarily jumpered
2.
plugged in at module and originating control.
3.
on page 16 while operating on high fire.
FreeStyle
™ control are securely
77