Function Description On Each Button Of Main Controller - Titan RT-Z05A User Manual

USE METHOD USE METHOD
Before sitting down
Please make sure the legrest has been connected well with the main
unit of massage chair.
Before sitting down, Please make sure all the components are back
to their original positions, if not, please turn on the power supply
switch and reset the components.
Caution
Do not sit on the massage chair when the legrest is rising.
Do not put heavy burden onto the legrest suddenly, otherwise, the
mechanical structure may be damaged.
Reclining and stretching system
Reclining backward
Keep pressing backrest descending button
gradually go down while the legrest will go up simultaneously with
double reminding sound Di Di produced by the controller. At this
moment, if your soles touch the sensors, the legrest will
automatically stretch out to fit your leg length. When the massage
chair reaches to a desired angle, release the backrest descending
button , at this moment, the backrest and legrest will stop
simultaneously. But at this moment, the legrest will automatically
retract until touching your soles, and then it will automatically stretch
out a little to fit your need. Next, you can operate the leg or foot
massage by pressing others buttons. In addition, pressing
buttons separately also can adjust the angle of legrest, in
this process, the legrest still can automatically adjust the extent of
stretching out and retracting. During legrest ascending/descending,
the backrest keeps in the same position. When legrest reaches to the
highest or lowest point, a continuous reminding sound will be heard.
Reclining backward operation
Backrest ascending button
Backrest descending button
16
, the backrest will
and
Legrest ascending button
Legrest descending button
NAME AND FUNCTION OF EACH PART NAME AND FUNCTION OF EACH PART

Function description on each button of main controller

Power supply and full auto function area
Press this button to turn on/off massage chair.
When power is on, the VFD display screen is lightened, and then
user can choose the corresponding functions of the flashing
function buttons and memory function buttons.
When power is off, the massage chair will reset, at this moment,
all the function buttons can not work. When the button
flashing, it signals the power supply is shut off and the massage
chair has gone to standby mode. After reset, the VFD display screen
will also be shut off.
Full auto function: There are four auto massage modes from RECOVERY,
EXTENT, RELAX to REFRESH for different people at different time.
Semi-auto function area
Vibration intensity adjusting: Press this button to adjust the
vibration intensity; there is 5-level vibration intensity for your
option. When the vibration intensity reaches the maximum/
minimum point, a double short reminding sound will be heard.
Back massage unit moving up: It is only effective in the
modes of slight shoulder adjustment and manual point.
Back massage unit moving down: It is only effective in the
modes of slight shoulder adjustment and manual point.
Press this button to turn on or off the waist heater.
is
Upper back auto: Press this button
to turn on UPPER BACK AUTO function.
Lower back auto: Press this button
to turn on LOWER BACK AUTO function.
Airbag auto: Press this button to
turn on or off AIRBAG AUTO function.
Airbag intensity adjusting: Press this
button to adjust the air intensity;
there is 5-level air intensity for your
option. When the air intensity reaches
the maximum/minimum point,a double
short reminding sound will be heard.
Press this button to turn on or off
seat vibration function.
5