Table of Contents
Advertisement
4.6.7 METHOD OF SETTING
1. IF
[1. VCO]
(1) [1] key
(2) [1] key
(3) [MENU
/ ] keys
(4) [MENU - / +] keys
(5) [DISPLAY] key
[2. DELAY POINT]
(1) [1] key
(2) [2] key
(3) [MENU - / +] keys
(4) [DISPLAY] key
NOTE:
When the setting value has been changed, the new value will be stored in memory immediately.
2. V/C, 3. DEF and 4. VSM PRESET
(1) [2] to [4] keys
(2) [MENU
/ ] keys
(3) [MENU - / +] keys
(4) [DISPLAY] key
NOTE:
When the setting value has been changed, the new value will be stored in memory immediately.
5. PRESET (Do not adjust)
6. SETUP TOUR
(1) By pressing the [6] key, you can change the ON or OFF [should be OFF].
(2) [MENU - / +] keys
(3) [MENU
] key
1-14 (No.YA415)
Select 1. IF.
Select 1. VCO.
Select setting items.
Adjust the values of the items.
As you press this key twice, you will return to the SERVICE MENU.
Select 1. IF.
Select 2. DELAY POINT.
Set (adjust) the setting values of the setting items.
When this is pressed twice, you will return to the SERVICE MENU.
Select one from 2. V/C, 3. DEF and 4. VSM PRESET.
Select setting items.
Adjust the values of the items.
When this is pressed, return to the SERVICE MENU.
Should be OFF:
If it is ON, when you turn off the power and turn on a power again, the JVC's logo will be shown
about 15 seconds automatically, and the SETUP TOUR starts.
Select Language.
Auto Search.
Advertisement
Table of Contents
