[Text Stamp] - Panasonic Lumix DMC-GH1K Operating Instructions Manual

Advanced (Playback)
∫ Delete the title
[SINGLE] setting
1 4
In step , delete all the texts, select [EXIT], and press [MENU/SET].
2
Press [‚].
3
Press [MENU/SET] to close the menu.
[MULTI] setting
1 4
In step , delete all the texts, select [EXIT], and press [MENU/SET].
2
Press [MENU/SET] to close the menu.
Note
• Text can be scrolled if all of the registered text does not fit on the screen.
• The name setting of [FACE RECOG.] or [BABY1]/[BABY2] and [PET] in scene mode or
[LOCATION] in travel date can also be registered by using the operation in steps
following.
• The name setting of [BABY1]/[BABY2] or [PET] in scene mode, [LOCATION] in travel date and
[TITLE EDIT] cannot be registered at the same time.
• You can print out texts (comments) using the "PHOTOfunSTUDIO 3.1 HD Edition" bundled
software on the CD-ROM (supplied).
• You can set up to 50 pictures at one time with [MULTI].
• You cannot use title edit for the following pictures.
– Motion pictures
– Protected pictures
– Pictures taken with [
– Pictures recorded with other equipment
You can stamp the recording date/time, age, travel date or title onto the recorded pictures.
It is suitable for regular size printing. (Pictures with a picture size larger than [S] will be
resized when stamping the date etc. on them.)
Select [TEXT STAMP] on the [PLAYBACK] mode menu. (P30)
Press 3/4 to select [SINGLE] or [MULTI] and then
press [MENU/SET].
Select the picture, and then
press [MENU/SET] to set.
• ['] appears on screen if the picture is
stamped with text.
[MULTI] setting
Press [DISPLAY] to set (repeat), and
then press [MENU/SET] to set.
• The setting is cancelled when
[DISPLAY] is pressed again.
138
VQT2A73
], [ ] or [ ]

[TEXT STAMP]

Press 2/1 to select
the picture.
[SINGLE]
Press 3/4/2/1 to
select the pictures.
4
and
[MULTI]