Indication - CONCORD BS501 series User Manual

Indication

Power on alert: After power-on the scanner will generate an alert signal to indicate a successful self-test.
LED indication: After each successful reading, the LED above the scanner will light up to indicate a good
barcode reading.
Beeper indication: After each successful reading, the scanner will beep to indicate a good barcode
reading, and its beep tone duration is adjustable.
Beep tone duration: This parameter can be adjusted for a good reading upon favorite usage.
Volume of beeper: This parameter can be adjusted for different level of the volume of the beeper.
Option bar code
Power on alert
LED indication
Beeper indication
Beep tone duration
Volume of beeper
Option
Disable
Enable
Disable
Enable
Disable
Enable
01-09 (10ms )
Low
Middle
High
23
SETUP
Alpha. entry
00
01*
00
01*
00
01*
01-09
05*
00
01
02*
END