Managing Mt-6320; Installing Software; Removing Installed Programs; Using Task Manager - Scantech MT-6320 User Manual

6 Managing MT-6320

6.1 Installing Software

The MT-6320 uses Microsoft Windows Mobile system, which provides infinite scalability.
You can install software on the MT-6320. The software that can be installed is in the .cab
and .exe formats.
Software in .cab Format
1. After the MT-6320 is connected to a PC, open My Computer and find Mobile Devices.
Copy the software package to the storage space of the MT-6320 or a memory card.
2. In File Explorer of the MT-6320, find the .cab file copied to the MT-6320.
3. Click the file to start installation and complete installation according to the installation
wizard.
4. After the software is installed successfully, the software icon is displayed in the
applications window.
Software in .exe Format
After the MT-6320 is synchronized with a PC, directly copy the .exe file to the storage space
of the MT-6320 or a memory card, open the file explorer on the MT-6320, and directly click
the file to run it.

6.2 Removing Installed Programs

If too many programs are installed or some programs are unnecessary, select Start >
Settings > System > Remove Programs to remove relevant programs.

6.3 Using Task Manager

When the MT-6320 runs at a low speed, click Task Manager in the lower right part of Home
or select Start > Settings > System > Task Manager to open the task manager, select the
required programs, and click End Task to close the programs.
- 31 -
MT-6320 User Manual