Fujitsu LifeBook N series User Manual page 65

Problem
Optical Drive Problems
The Media Player The Windows media
Access indicator player auto insert
on the Status notification function is
Indicator Panel active and is checking to
blinks at regular see if a media disc is
intervals when no ready to run.
disc is in the tray
or the media drive
is not installed.
The notebook fails The media player software
to Auto-Play a has not been installed.
DVD movie.
The media player The region code for the
will not play DVD does not match that
international DVD of the media player.
titles
Hard Drive Problems
You cannot access The setup utility is
your hard drive. incorrectly set for your
internal (Primary Master)
or optional second hard
drive (Primary Slave).
The wrong drive
designator was used by
an application when a
bootable CD-ROM was
used to start the LifeBook
notebook.
Possible Cause
Tr o u b l e s h o o t i n g
Possible Solution
This is normal.
Locate and install the DVD-ROM Applications
CD.
All Fujitsu notebook DVD drive is pre-set at
factory to read DVD title with region codes for
specific Asia Pacific markets (e.g. code 3 for
Asian, code 4 for Australia, code 6 for China).
The first time you play a DVD title with a
region code different from that of the DVD
optical drive - the region code set at factory,
you will be prompted to change the region
code of the DVD optical drive. The region code
of a DVD optical drive can be changed up to 4
times, after which it will be locked so that the
DVD optical drive can only play DVD titles of
the final region code set.
Revise BIOS settings to set both Primary
Master and Primary Slave correctly.
Verify drive designator used by application is
in use by the operating system. When the
operating system is booted from a CD, drive
designations are automatically adjusted.
57