Table of Contents
Advertisement
5-12
CB3000 Client Bridge User Guide
c. Specify the number of ping packets to transmit (in other words, the number of ping tests to perform).
d. Click the
ICMP Ping Test
Figure 5.8 Ping Test with Associated Device Status Example
Use the results to determine whether the device association should be maintained or replaced by
a device association providing better network coverage and signal strength.
• Ping the Host – The CB3000 can verify its link with its host by sending WNMP ping packets to the host's
IP address. To conduct an ICMP ping test with the CB3000's host:
a. Enter the IP address of the host.
b. Specify the length of each data packet transmitted to the target device during the test. This
increment is defined in bytes. If you don't know, enter a large arbitrary amount like 500.
c. Specify the number of ping packets to transmit.
d. Click the
Comm Connection Test
e. Use this information to determine whether the host connection should be maintained or replaced
by a host connection providing better connectivity with the CB3000.
button. Results of the ping test displays in the
button. Results of the test displays in the
Figure 5.9 Ping Test with Host Status Example
box.
Status
box.
Status
Advertisement
Table of Contents
