Symbol CB3000 User Manual page 69

• 3 - Errors. Describes an error.
• 4 - Warning. Action should be taken as soon as possible.
• 5 - Notice. A normal but important event.
• 6 - Info. Nothing to do, since information only.
• 7 - Debugging purposes only.
• saved locally – Select this radio button to save the log file to the host to which the CB3000 is
physically connected. Log entries are not saved in the CB3000. While the CB3000 is in operation,
log data temporarily resides in memory.
• syslog server – Select this radio button to enable an external syslog server to listen for incoming
syslog messages and decode the messages into a log for viewing. Enter the IP address of an
external syslog server in order to route the syslog events to that destination.
• email – Select this radio button to configure the CB3000 to route log files to the email address and
mail server designated. Configure the following parameters:
• eMail address – Enter an email address as the target destination for the log file.
• Your Outgoing Mail Server– Enter the IP address of the outgoing mail server required to
route the log file to the destination email address.
3. Click Apply to save any changes.
4. Click Undo Changes to undo any changes made. Configurations revert to the last saved configuration.
4-17
Management Options