Symbol CB3000 User Manual page 34

3-4
CB3000 Client Bridge User Guide
Figure 3.2 WLAN Settings—Infrastructure Network Configuration
3. Configure the ESSID (Wireless LAN Service ID) field, as appropriate:
• Attach to any ESSID automatically – Select this radio button to enable the CB3000 to randomly
select a target WLAN for connection.
• Specify the ESSID – Select this button to enter the name of a target WLAN or use the drop-down
menu to select an existing WLAN. Click "View" to display the available networks first, if unsure.
4. Select the Frequency Band. Options include "a/b/g", "a", or "b/g".
Ensure the frequency band selected is consistent with the WLAN network. By restricting the Frequency
Band on the CB3000 you can reduce the time the CB3000 takes to search for available APs.
5. Click the View Available Networks link to view the Available Networks screen.
Use this screen to view a list of available ESSIDs (networks), and possibly select an ESSID. For more
information, see Available
6. Select the Scan Mode as either Active Scan or Passive Scan.
Active Scan mode takes less time when searching for APs by sending probe requests. Passive Scan
takes more time during a scan, but only listens for AP beacons.
7. In the Country/Region section, select the appropriate operating region/country.
Networks.