Both Channel A and Channel B have discreet direct outputs on female XLR connectors. The signal on this output is exactly equivalent to the signal
from the corresponding input. The level of the output signal is not affected by the gain setting for that channel. Additionally, signal delivered on the
RCA (phono) jacks is not present on the Channel B direct line level output.
The Post-Gain Line out female XLR connector is a mixed output of Channel A, Channel B and the RCA (phono) jacks. This mix is affected by gain
knobs on both Channel A and Channel B and the MIC/LINE switch on Channel A, but the output level is still Line Level.
WARNING! Do not connect the POST-GAIN LINE OUTPUT of a K Series system to any INPUT of the SAME UNIT. This output is
designed to send signal to OTHER K Series units or to other audio equipment. Failure to follow this warning may result in very
unpleasant sounds produced at extremely high output volumes.
Output Connections
KSub
Channel A Line
Level Direct Output
Both Channel A and Channel B have discrete direct outputs on female XLR connectors. The signal on this output is exactly equivalent to the signal
from the corresponding input. The level of the output signal is not affected by the gain set on the subwoofer gain knob.
K series 105° 1000 w active 8" (200 mm) 2-way loudspeaker system 90° 1000 w active 10" (250 mm) 2-way loudspeaker system 75° 1000 w active 12" (300 mm) 2-way loudspeaker system dual 12" (300 mm) 1000 w active 4th-order bandpass subwoofer system (22 pages)
Kw series 75° 1000 w active 12" (300 mm) 2-way loudspeaker system 60° 1000 w active 15" (380 mm) 2-way loudspeaker system 75° 1000 w active 15" (380 mm) 3-way loudspeaker system 18" (460 mm) 1000 w subwoofer system (29 pages)