Toyota 2015 Prius Owner's Manual page 63

Installation with LATCH system
1
Adjusting the angle of the seat-
back.
While pulling the lever, fold the
seatback forward and then back to
the 1st lock position (most upright
position) until it locks into place.
2
Raise the head restraint.
If the child restraint system is
installed, it may interfere with the
head restraint. In this case, remove
the head restraint.
3
Open the fasteners on the
lower part of the seatback.
PRIUS v_OM_OM47887U_(U)
1-1. For safe use
I n f o r ma t i o n P r o v i d e d b y :
63
1