Control Panel - Zanussi ZBA32050SA User Manual

• This product must be serviced by an author-
ized Service Centre, and only genuine spare
parts must be used.
Environment Protection
This appliance does not contain gasses
which could damage the ozone layer, in ei-
ther its refrigerant circuit or insulation materials.
The appliance shall not be discarded together

Control panel

Temperature indicator LED
1
Quick Chill indicator
2
Quick Chill button
3
Temperature regulator
4
ON/OFF button
Switching on
Insert the plug into the wall socket.
Touch the temperature regulator button if all
LED are off.
Switching off
Keep touching the temperature regulator button
for 3 Sec.
All indicators light off.
Temperature regulation
To operate the appliance, proceed as follows:
• touch the temperature regulator button until
the LED corresponding to the required tem-
4
1 2
4 3
with the urban refuse and rubbish. The insula-
tion foam contains flammable gases: the appli-
ance shall be disposed according to the appli-
cable regulations to obtain from your local au-
thorities. Avoid damaging the cooling unit, espe-
cially at the rear near the heat exchanger. The
materials used on this appliance marked by the
symbol are recyclable.
perature lights up. Selection is progressive,
varying from 2 to 8°C.
At first button touch actual setting LED keeps
blinking.
Any time the button is touch the set tempera-
ture is moved to 1 position right. Corre-
sponding LED will blink for a while.
Touch the setting button until the required
temperature is selected. The set will be fixed
coldest setting: +2°C
warmest setting: +8°C
A medium setting is generally the most suitable.
However, the exact setting should be chosen
keeping in mind that the temperature inside the
appliance depends on:
• room temperature
• how often the door is opened
• quantity of food stored
• appliance location.
QuickChill function
You can activate the QuickChill function by
pressing the QuickChill button.
The LED corresponding to the symbol Quick-
Chill indicator lights up.
You can deactivate the QuickChill function by
pressing the QuickChill button again.
The QuickChill indicator will light off.
Important!
This function stops automatically after 52 hours.
www.zanussi.com