Zanussi ZBA32050SA User Manual page 13

Push the part (Hc) on the part (Ha).
Ha
Hc
Open the appliance door and the kitchen furni-
ture door at an angle of 90°.
Insert the small square (Hb) into guide (Ha).
8 mm
Put together the appliance door and the furniture
door and mark the holes.
Remove the small squares and drill holes with ø
2 mm at 8 mm from the outer edge of the door.
Place the small square on the guide again and fix
it with the screws supplied.
Ha
Hb
www.zanussi.com
13