Lilin PMH-POE08260W User Manual

8 Ports PoE
Plus
Fast Ethernet Switch
8 x 10/100 PoE+ 802.3at
w/ 2 Gigabit Combo Ports
RJ45/SFP
User's Manual

FCC Warning

This device has been tested and found to
comply with limits for a Class A digital device,
pursuant to Part 15 of FCC Rules.
limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment. This equipment generates and
radiates radio frequency energy and, if not
installed and used in accordance with the user's
manual, it may cause interference in which case
users will be required to correct interference at
their own expenses.

CE Warning

This is a Class A product. In a domestic
environment, this product may cause radio
interference in which case the user may be
required to take adequate measures.

Introduction

This 8 ports 10/100 Mbps PoE switch includes
auto-MDI/MDIX crossover detection function. 8
of those ports are all built with PoE functionality,
providing the ultimate choice in network
flexibility. With this added PoE feature, this
switch is an ideal solution for building wireless,
IP surveillance, and VoIP networks.
The rack-mount size was specifically designed
for medium to large workgroups. The Switch can
be installed where space is limited; moreover it
provides smooth network migration and easy
upgrade to network capacity. The 19" size can
be rack-mount on 19" cabinet.

Package Contents

Before you start to install this switch, please
verify your package that contains the following
These
items:

One Fast Ethernet PoE Switch

One Power Code

One User's Manual

A pair Rack-mount kit + 8 Screws
Note: If any of these items is found missing or
damaged, please contact your local supplier for
replacement.

Key Features

 8- Port 10/100M (Auto-negotiation) Switch
 8 PSE/PoE function ports
 Supporting the power Max. 30 W for each
PSE/PoE port
 19" rack-mount size
 Auto-detect full/half-duplex modes for any
port
 Dedicated full-duplex 200Mbps bandwidth
 Store-and-Forward switching methods
 IEEE 802.3x flow control for full-duplex and
back-pressure flow control for half-duplex
 Non-blocking full wire speed forwarding
 Auto-MDI/MDI-X function for any port

Front Panel (LEDs)

LED Indicators of 8 Port PoE 10/100M
Switch
LED Status Description
On Power is on.
Power
Off Power is off.
On Port is for connection.
Off No connection.
LINK/ACT
Data is transmitting or
Blinking
receiving
Port is linked to Power
On
Device
PoE
No Power Device is
Off
connected
On Port is for connection.
Off No connection.
1000M
Data is transmitting or
Blinking
receiving

Connections

Switch/Hub to this 8 Port PoE Fast
Ethernet Switch
This switch provides automatic crossover
detection functionality for any port.
simple and friendly to up-link to another
switch without crossover cable.
It is