Lilin PMH-POE08130WT4 User Manual

8 Ports with 4 ports
PoE
Plus
Fast Ethernet Switch
+
8 x 10/100 with 4 PoE 802.3at
w/ 2 Gigabit Combo Ports
RJ45/SFP
User's Manual
FCC Warning
This device has been tested and found to
comply with limits for a Class A digital device,
pursuant to Part 15 of FCC Rules.
limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment. This equipment generates and
radiates radio frequency energy and, if not
installed and used in accordance with the user's
manual, it may cause interference in which case
users will be required to correct interference at
their own expenses.
CE Warning
This is a Class A product. In a domestic
environment, this product may cause radio
interference in which case the user may be
required to take adequate measures.
Introduction
This 8 ports 10/100 Mbps with 4 ports PoE+
switch includes auto-MDI/MDIX crossover
detection function. 8 of those ports are all built
with PoE functionality, providing the ultimate
choice in network flexibility. With this added
PoE feature, this switch is an ideal solution for
building wireless, IP surveillance, and VoIP
networks.
The rack-mount size was specifically designed
for medium to large workgroups. The Switch can
be installed where space is limited; moreover it
provides smooth network migration and easy
upgrade to network capacity. The 19" size can
be rack-mount on 19" cabinet.
Package Contents
Before you start to install this switch, please
verify your package that contains the following
These
items:
 One Fast Ethernet PoE Switch
 One Power Cord
 One User's Manual

A pair Rack-mount kit + 8 Screws
Note: If any of these items is found missing or
damaged, please contact your local supplier for
replacement.
Key Features
 8- Port 10/100M Switch with 4 PSE/PoE
function ports (5-8 ports)
 Supporting the power Max. 30 W for each
PSE/PoE port
 19" rack-mount size
 Auto-detect full/half-duplex modes for any
port
 Dedicated full-duplex 200Mbps bandwidth
 Store-and-Forward switching methods
 IEEE 802.3x flow control for full-duplex and
back-pressure flow control for half-duplex
 Non-blocking full wire speed forwarding
 Auto-MDI/MDI-X function for any port
Front Panel (LEDs)
LED Indicators of 8 Port with 4 ports
PoE 10/100M Switch
LED Status Description
On Power is on.
Power
Off Power is off.
On Port is for connection.
Off No connection.
LINK/ACT
Data is transmitting or
Blinking
receiving
Port is linked to Power
On
Device
PoE
No Power Device is
Off
connected
On Port is for connection.
Off No connection.
1000M
Data is transmitting or
Blinking
receiving
Connections
Switch/Hub to this 4 Port PoE Fast
Ethernet Switch
This switch provides automatic crossover
detection functionality for any port.
simple and friendly to up-link to another
switch without crossover cable.
It is