Frequently Asked Questions About Toneprint Pedals - TC Electronic Helix Phaser User Manual

Frequently asked questions
Frequently asked questions
about TonePrint pedals
"Are TonePrint pedals analog or digital?"
The dry signal of your guitar passes straight
through this effect pedal and is in no way digi-
tized. The "wet" signal is just added.
"Do the TonePrint pedals have balanced
or unbalanced inputs/outputs?"
TonePrint pedals have unbalanced inputs and
outputs. Use cables with TS jacks (i.e., standard
instrument cables).
"Is it possible to run this TonePrint pedal
in the effects loop of a tube amp?"
Yes. All TonePrint pedals have a very wide gain
range and are designed to run at both instru-
ment and line level. There are a few amps which
are capable of running much hotter than regu-
lar +4 dBu line-level signals because of the way
their effect loops are designed. With these amps,
it might be possible to get the input to clip. But
for 99 % of all amps, the TonePrint pedals will
work just fine.
For additional information about your TC Elec-
tronic TonePrint effect pedal, please go to TC
Electronic Support:
tcelectronic.com/support/
Helix Phaser English manual 2015-04-27 20