GoPro Hero 3+ Quick Manual page 16

13
Video Mode Settings. 1 of 4
PAL / NTSC Mode
●
- Press POWER until you see the Settings Screen , enter with SHUTTER button and go to:
→ →
SET UP NTSC/PAL Select NTSC or PAL
- To exit press POWER until you get to EXIT.
Although your area is PAL, the NTSC mode reaches higher fps in video formats like 720 (100fps for
PAL and 120fps(actually 119,8) for NTSC). Use NTSC if you need those speeds, in postproduction with
GoPro Studio you will be able to output the slow motion video in the required speed (24, 25 or 30).
Resolution
●
- Press POWER until you see the Settings Screen , enter with SHUTTER button and go to:
→ →
RES Select: 4K 17:9 / 4K / 2.7K 17:9 / 2.7K / 1440 /
1080SUPER / 1080 / 960 / 720SUPER / 720 / WVGA
- To exit press POWER until you get to EXIT.
4K formats have a maximum frame rate of 15fps.
1080SUPER & 720SUPER formats use an even larger sensor area to provide an even wider
frame; this is independent from the Field of View setting and that gets locked in WIDE position
(see next card).
See details on resolutions and their frame rates in card 26.
See video modes and their recommended use in card 27.