Ancillary (Ship Loose Accessories); Single Point Power Kit; Refrigerant Line Sweat Adapter Kits; Return Air Filter Box With Duct Collar Kit - Liebert 8 Tons User Manual

1.3

Ancillary (Ship Loose Accessories)

1.3.1

Single Point Power Kit

A Single Point Power Kit allows the connection of a system (Evaporator and indoor condensing unit)
to a single power source when the units are close coupled. The kit includes a junction box with power
distribution, sub-fusing, and evaporator and condenser wiring.
1.3.2

Refrigerant Line Sweat Adapter Kits

This kit includes the compatible fittings required (four suction and four liquid line connections) when
using field supplied interconnecting refrigerant piping.
1.3.3

Return Air Filter Box with Duct Collar Kit

A return air filter box with duct flange, 4" (102 mm) filter, and a supply air duct flange are provided
for ducting the evaporator air.
1.3.4

Condensate Pump Kit

A condensate pump is required when the evaporator is installed below the level of the gravity-fed
drain line. Components include: the pump; check valve; sump; level sensor; float switch; and controls.
Refer to detailed instructions and drawings supplied with the pump.
1.3.5

Remote Monitoring and Control

Liebert can provide a variety of remote monitoring and control devices to enhance your Mini-Mate2
system. These include water detection, remote monitoring of a single unit, and remote control/moni-
toring of multiple units.
1.3.6

Remote Sensors

Remote temperature/humidity sensors can be mounted in the controlled space or in duct work and
includes 30 feet of control cable.
3
Product Features