Ground Balancing/Tracking - Fisher Coinstrike Operating Manual

GROUND BALANCING/TRACKING

The Coin Strike offers three options for handling the soil
mineralization you may encounter. Our new auto-ground balance
system and our FisherTrak ground tracking system are made possible
by our AFS © (Adaptive Feedback System) technology.
AUTO GROUND BALANCE:
The precision automatic ground balance system will provide ground
balance accuracy that exceeds any setting achieved manually.
The procedure is quite simple: After you have set up your controls
and are back in the search mode, lower the search coil to the
ground in an area completely void of metal. Next, press the AUTO
GROUND button and hold it for about 2 seconds. Then, while still
holding the AUTO GROUND button down, lift the coil about 6 inches
off the ground, hold for a second, and release the button. The
Coin Strike will give you a brief tone to let you know the ground
balance has been achieved. This procedure can be repeated
at any time, as you change your settings or ground conditions
change. It is fast and accurate.
14