Connecting Your System; Tv With Motorized System (Diseqc 1.2) - Sab Satellite Titan III Combo HD User Manual

7. Connecting Your System

There are two ways to connect the receiver to your existing TV system. We recommend using one of the following
cases for the best result:
1. If you have a high definition television set, you should use a HDMI cable for best result, Plug one end of the cable
into the HDMI socket on the receiver, and the other end into the matching socket on your television. In this
case, you do not have to make audio connections because the HDMI connector can output stereo audio or Dolby
Digital audio.
2. Connect one end of RCA cable to the RCA jack on the back of the receiver and the other end to a RCA jack on
your TV.
Finally connect the coaxial cable from the LNB of your Dish to the LNB IN jack on the receiver.
With External Audio / Hi-Fi System
To connect any external Audio Hi-Fi system, the receiver has been provided with RCA connector at the back of the
receiver marked with AV OUT.
Connect an RCA cable from the AV OUT jack on the back of the receiver to the LINE, AUX, SPARE OR EXTRA input
jacks on your Hi-Fi System.
7.1

TV with Motorized System (DiSEqC 1.2)

Connect one end of your coaxial cable to the LNB IN connector on the receiver and the other end to the REC or
Receiver connector on the DiSEqC 1.2 motor.
Connect the coaxial cable from the LNB to the LNB connector on the DiSEqC 1.2 motor.
All our receivers are designed to be DiSEqC 1.0 and DiSEqC 1.2 compatible.
This allows multiple antennas to be connected to the receiver at the same time.
If you have two or more fixed antennas or LNBs, then we recommend you use a DiSEqC 1.0
switch.
Connect the coaxial cable from the first LNB to the LNB 1 or LNB A input connector of the DiSEqC switch.
Do the same for any other LNBs that you have.
Connect one end of a coaxial cable to the RF output connector of the DiSEqC switch,
8