Common Interface; Media; Record; Movie - Sab Satellite Titan III Combo HD User Manual

12.2

COMMON INTERFACE

We provide two CI slots (option, some model only has
one slot) for user to use. Using different CAM & cards
provided by different CAS operator, user can view many
type or scrambled channels.
We provide this menu to display the detail information of
the CAM & cards inserted in the slots. User can check all
this information according to the help message at the
bottom of each menu.
Note:
All information showed in this menu and submenu is
abstract from CAM & card. In case something is wrong,
it may be the problem of CAM or card.
When you insert the CAM correctly at any time, a
message will show in the screen to tell you that which
CAM has been detected by the receiver and is available
now.
CI Message
It is used to turn on or turn off the CI info display function
by using , buttons or " OK " button to select.
ON: To display the CI info.
OFF: Don't display the CI info.

13. Media

if you enter to the "Media" Menu, you will see the picture
like the below:
Note:
If no USB Hard Disk insert to the receiver this menu is
not available.

13.1 Record

In this menu you can playback the record files, and you
can press [Red] key to rename the file, or press [Green]
key to lock the file, or press [Yellow] key to delete the
file.
You can press [1] key to adjust the volume while you
preview the record file on top of the right corner .and you
can press to enable or disable the audio.

13.2 Movie

I
n this menu you can press [left/right] button to select the
USB disk that you want to visit. Then Press [ok] button
to enter the Video list
30