c)
Upgrade by Cable
This function can upgrade the software through
signal lines from the cable.
1 Input the frequency, symbol rate value and
download PID, and select scan mode.
2 Then move the highlight to the start button and
3 press [OK] key to begin to upgrade.
11.9 Default Setting
11.9.1 Default Value:
When you press [OK] key In the "Default Setting"
item:
1 There will pop a dialogue for you to enter the
password, and the default password is "0000".
2 After you input the correct password, there will
show a warning message to inquiry you "The
operation will load default and erase all the
channels that user added, continue?".
3 If you select "OK" option, the all revised
parameters of the receiver will reset to default
value. Please carefully to using this function.
4 In step 1 and step 2, press[Exit]key can draw
back from this item and without saving.
11.9.2 Delete All Channel:
When you press [OK] key in the "Delete All Channel"
item, it will pop a dialogue ask you whether confirm to
delete all channel. If you select "OK", all the channel will
be deleted.
28