Draytek Vigor2930 Series Quick Start Manual page 23

Dual-wan security firewall

Hide thumbs Also See for Vigor2930 Series:

Table of Contents

WEP Only

WEP/802.1x Only Accepts only WEP clients and the encryption key is obtained

WPA/PSK Only

WPA/802.1x Only Accepts only WPA clients, and the encryption key is obtained

Note: You should also set RADIUS Server simultaneously if WEP/802.1x Only or

WPA/802.1x Only mode is selected.

For WPA encryption, type in 8~63 ASCII characters or 64 Hexadecimal digits

leading by 0x, for example "0123456789ABCD...." or "0x321253abcde....." on the

field of Pre-Shared Key (PSK). WPA encrypts each frame transmitted from the

radio using the Pre-Shared Key (PSK) which entered from this panel.

As to WEP encryption, select 64-bit or 128-bit as the encryption mode. For 64bits

WEP key, type in 5 ASCII characters or 10 hexadecimal digitals leading by 0x, for

example, ABCDE or 0x4142434445. And for 128bits WEP key, type in 13 ASCII

characters or 26 hexadecimal digits leading by 0x, for example, ABCDEFGHIJKLM

or 0x4142434445464748494A4B4C4D. Only one WEP key can be selected and

allows user to type in the characters.

Click OK to save settings.

Be aware that for the communication, all wireless devices must support the same

encryption bit length and share the same key. If WEP mode is selected, only one of four

preset keys can be selected at one time.

router, please select any one of the encryption mode here.

Accepts only WEP clients and the encryption key should be

entered in WEP Key.

dynamically from RADIUS server with 802.1X protocol.

Accepts only WPA clients and the encryption key should be

entered in PSK.

dynamically from RADIUS server with 802.1X protocol.

Table of Contents