Nokia N97 mini User Manual page 109

Q: Why can't I see a wireless LAN (WLAN) access point
even though I know I'm within its range?
A: The WLAN access point may use a hidden service set
identifier (SSID). You can only access networks that use a
hidden SSID if you know the correct SSID, and have created a
WLAN internet access point for the network on your Nokia
device.
Q: How do I turn the wireless LAN (WLAN) off on my Nokia
device?
A: The WLAN on your Nokia device is deactivated when you
are not connected or trying to connect to another access
point, or not scanning for available networks. To further
reduce battery consumption, you can specify that your Nokia
device does not scan, or scans less often, for available
networks in the background. The WLAN is deactivated in
between background scans.
To change the background scan settings, do the following:
1 Select Menu Settings
>
2 To increase the background scan time interval, adjust the
time in Scan for networks. To stop background scans,
select Show WLAN availability
3 To save your changes, select Back.
When Show WLAN availability
WLAN availability icon is not displayed in the home
screen. However, you can still manually scan for available
WLAN networks, and connect to WLAN networks as usual.
© 2010 Nokia. All rights reserved.
and Connectivity > WLAN.
> Never.
is set to Never, the
Q: What do I do if the memory is full?
A: Delete items from the memory. If
to perform operation. Delete some data first.
low. Delete some data from phone memory.
when you are deleting several items at the same time, delete
items one by one, beginning with the smallest items.
Q: Why can't I select a contact for my message?
A: The contact card does not have a phone number, address,
or e-mail address. Select
contact, and edit the contact card.
Q: How can I end the data connection when the device
starts a data connection again and again?
A: The device may be trying to retrieve a multimedia message
from the multimedia message centre. To stop the device from
making a data connection, select
Options Settings Multimedia message
> >
retrieval. Select Manual
centre save messages to be retrieved later, or
all incoming multimedia messages. If you select Manual, you
receive a notification when you have a new message in the
multimedia message centre. If you select Off, the device does
not make any network connections related to multimedia
messaging.
To set the device to use a packet data connection only if you
start an application or action that needs it, select
Not enough memory
or
is displayed
Menu Contacts and the relevant
>
Menu Messaging
>
Multimedia
>
to have the multimedia messaging
Off
Memory
and
to ignore
Menu
>
109