Troubleshooting; 7-1.Before Performing Service; 7-2.Test Mode - LG WD(M)-10130(5)F Service Manual

7. TROUBLESHOOTING

7-1. BEFORE PERFORMING SERVICE
■ Be careful of electric shock or disconnecting the parts while troubleshooting.
■ Voltage of each terminal in 220-240V~ and DC while applying an electric current.
7-2. QC TEST MODE.
① Pressing Temp, and Option button simultaneously.
② Power supply ON with pressing upper two button.
③ Press the START/PAUSE button as follows.
~Press the START/PAUSE button more 4 times until stop spinning₩
Pressing number of
［START/PAUSE］ button
None
1 time
2 times
3 times
4 times
5 times
6 times
7 times
8 times
9 times
10 times
Checking Point
All lamps turn on
Clockwise spin (right)
Low speed spin
High speed spin
Inlet valve for pre-wash operation
Inlet valve for main-wash operation
Hot inlet valve in case of hot water fill
Inlet valve for main-wash operation
Counterclockwise spin (left)
A Heater is in operation for 3 sec.
Draining pump operation
Auto off operation
15
Option
Temp.