Table of Contents
Advertisement
2 Installation and use
By the use of ferrite, the card reader is insensitive to be installed on a metal surface.
2.1
Location
Determine the location where the Sirius card reader should be installed. There is a
maximum cable length between the reader and door controller.
Exception: using an external power supply, you can increase the achievable distance
between the door controller and card reader.
Install the reader with a minimum lateral distance of 20 cm from each other.
2.2
Mounting instructions
Mount the card reader preferably on an outlet
Pull the cable through the mounting plate of the Sirius reader.
The screw hole of the card reader should be placed on the underside.
Mount the back plate of the card reader to the outlet, using the existing screws.
When not removed, remove the orange colored film of the Buzzer
Click the front of the card reader at the top of the mounting plate
Attach the front of the card reader to the mounting plate with the supplied 'special
mounting bolts.
Picture 1: Sirius i80 measurements
Hide quick links:
Advertisement
Table of Contents
