Table of Contents
Advertisement
To apply Wake-On-Lan function, set [Power Management] option of the Adapter
driver Properties:
[ x ] Allow this device to bring the computer out of standby.
[ x ] Allow the computer to turn off this device to save power.
The settings allow the adapter to wake up the computer out of standby state when
receiving magic packets or Ping packets.
Using the Associated Drivers in the driver diskette
After driver setup, the adapter is identified as :
Realtek RTL8139/810x Family Fast Ethernet NIC
Link Speed/Duplex Mode options:
Auto Mode
100 Half Mode
Note: other options are not recommended.
To apply Wake-On-Lan function, set [Power Management] option of the Adapter
driver Properties:
[ x ] Allow this device to bring the computer out of standby.
[ x ] Allow the computer to turn off this device to save power.
More [Advanced] options of Adapter driver Properties:
Link Down Power Saving (default disabled)
WakeUp on Link Change (default disabled)
WakeUp on ARP/PING (default enabled)
The settings allow to wake up a computer out of:
Standby state by magic packets, Ping packet, and link up event Shutdown state by
magic packet and link up event
Other settings are recommended to remain on default values.
FX port becomes 100M Full Duplex
FX port becomes 100M Half Duplex
Advertisement
Table of Contents
