Basic Operation - Panasonic WV-CP500 Installation Manual

Basic operation

The description below explains how to operate the setup menu basically.
The operations in the setup menu are performed with the operation buttons (☞ pages 9 and 10)
after calling up the setup menu on the connected video monitor.
The operations in the setup menu can also be performed through the system controller (option).
Screenshot 1
Hold down the setting button for more than
2 seconds simultaneously to call up the top
screen of the setup menu.
MODEL
CAMERA ID
CAMERA
SYSTEM
BACK-FOCUS
SPECIAL
LANGUAGE
END
Screenshot 2
The setup mode changes to "ENABLE", and
the setup menu becomes ready to be set.
MODEL
CAMERA ID
CAMERA
SYSTEM
BACK-FOCUS
SPECIAL
LANGUAGE
END
24
WV-CP500 SERIES
OFF
SETUP DISABLE
WV-CP500 SERIES
OFF
SETUP ENABLE
Step 1
Press the up button or the down button to
move the cursor to "END".
Step 2
Press the right button to move the cursor
to "SETUP", and press the setting button to
change the setup mode from "DISABLE" to
"ENABLE".
Step 3
Move the cursor to the item to be set, and
press the setting button.