RED Scarlet-X Operation Manual page 141

When the touchscreen self-test is on, you can verify all areas of the touch screen respond to touch.
Simply touch each box using your finger. The touchscreen responds to the touch and the Green box
turns Blue.
To exit the Touchscreen Self-Test:
•
Place your finger on the touchscreen and hold it there until the main screen appears.
• Press the Enter or Menu button on the Side Handle or REDmote.
RESTORE SYSTEM
Restore System permits ALL camera configuration and setup data to be reset to factory default values.
When selected, you will be asked to confirm if you want to delete all settings and restore the factory
default settings. After settings are restored, "DEFAULT SETTINGS RESTORED, INITIALIZING
RESTART..." Camera will automatically power down and will require you to manually power it up.
NOTE: User key settings will be reset as well as any other changes from the cameras default
settings. The REDmote will also require paring to communicate wirelessly with the camera.
140 140
©2011-2012 RED.COM INC.
Version 3.0
MARCH 2, 20955-0003_v3.0, REV-A