Miele TX2349 Quick Start Manual

Cleaning and care Descaling
Cleaning the milk pipework Degreasing the brew unit Descaling must be carried out and takes
approx. 20 minutes.
ĺ
The milk pipework must be cleaned with After 200 portions have been dispensed,
You will need 2 Miele descaling tablets.
Degrease the brew unit " will appear in the
the Original Miele cleaning agent for milk "
pipework. Cleaning takes approx. 7 min- display. This message will not go out until
The cleaning process cannot be can-
utes. the brew unit has been degreased. celled once it has started. It must be
completed through to the end.
You need one sachet of the cleaning agent You need 1 Miele cleaning tablet to de-
ĺ
for milk pipework. grease the brew unit. The process takes Maintenance "  in the main
Touch "
approx. 10 minutes.
Descale appliance ".
The cleaning process cannot be can- menu and then "
celled once it has started. It must be The cleaning process cannot be can-
The descaling programme will begin.
ĺ
completed through to the end. celled once it has started. It must be
Follow the instructions in the display.
ĺ
completed through to the end.
Maintenance "  in the main
Select "
ĺ
Clean the milk pipework ". Maintenance "  in the main
menu and then " Touch "
menu and then " Degrease the brew unit ".
The cleaning process will start.
ĺ
The process will start.
Follow the instructions in the display.
ĺ
Follow the instructions in the display.
Place a cleaning tablet in the ground
When "
coffee chute and close the chute " appears in
the display:
ĺ
Fill the water container to the marker 
with lukewarm water and drop two des-
caling tablets in the water. Push the wa-
ter container back into the machine.
ĺ
Fill the water container with lukewarm Ensure that you adhere to the mixing ra-
tio for the descaling tablets. It is impor-
water up to the level marker  and add
tant that you do not fill the water con-
1 sachet of the Original Miele cleaning
tainer with more or less water than pre-
agent for milk pipework. Push the water
ĺ
container back into the machine. scribed. The descaling programme will
Remove the coffee chute cover and
otherwise be cancelled prematurely and
When " Rinse and refill the water container " ap- open the lid of the coffee chute. Place a
will need to be repeated.
pears in the display: cleaning tablet in the coffee chute.
ĺ ĺ
Rinse the water container and fill with
When "
Remove the water container and rinse it Follow the further instructions given in
fresh tap water up to the  symbol " appears
carefully with clean water. the display.
in the display:
The degreasing process is finished when ĺ
Ensure that no cleaning agent is left in
Process finished " appears in the display. Remove the water container and rinse it
"
the water container.
carefully with clean water.
The cleaning process is finished when
Ensure that no descaling solution resi-
Process finished " appears in the display.
"
due remains in the water container.
The descaling programme is finished when
" Process finished " appears in the display.
Special instructions
Changing the portion size or Adjusting drink parameters User profiles
ĺ
drink parameters Drink parameters ".
Touch "
You can set up individual User profiles and
You can adjust the following parameters: save individual portion sizes for all drinks
The changed portion sizes or parameters
for each profile.
are always saved in the current User pro- – Amount of coffee
file. The name of the current User profile The name of the current User profile is
– Brewing temperature
appears in the top left of the display. shown in the top left of the display.
– Pre-brewing
ĺ
OK" when you have adjust-
You are in the drinks menu. Touch " Calling up User profiles
ĺ
ĺ
ed drink parameters according to your
Place the desired cup under the central User profiles "  in the main menu
Touch "
tastes.
spout.
User profiles " in the drinks
ĺ or select "
Edit " and " Change drink ".
Select " menu.
ĺ Resetting drink settings
Swipe across the display until the op-
To reset drink portions and parameters for
Creating a User profile
tion you want appears, then touch it to
ĺ
all drinks to the factory default settings,
select it.
ĺ Touch " Create profile ".
Edit " in the drinks menu and then
Change the portion size " or select "
Now you can "
The editor will open in the display.
Reset drinks ".
Drink parameters ". " ĺ
adjust the "
Select the name you want using the key-
" Reset all drinks to default settings? " will ap-
OK" .
. board and touch "
Changing the portion size pear in the display
ĺ
ĺ If you have allocated a profile in addition
Yes ".
Change the portion size ". Touch "
Touch "
to the Miele standard profile, you have the
Save " will
The drink will be prepared and " option to:
appear in the display.
ĺ – Select profile
When the cup is filled up to the level you
– Change name
Save ".
want, touch "
– Delete profile
If you want to change portion sizes for
– Change profile
Cappuccino, Latte macchiato or Caffè
(You can choose whether User pro-
latte, the components will be shown in the
files are changed manually, after a drink
display.
ĺ is dispensed, or when the machine is
Touch the components, whose portion
switched on.)
size you want to change.
The tick  will show you which compo- Editing drinks for User profiles
nents are selected.
ĺ You can create your own drinks for each
OK" .
Touch "
User profile and for each drink you can ad-
When the quantity for each component just the portion size and other parameters,
reaches the level you want, touch " Save ". e.g. amount of coffee, temperature.
ĺ
Save the required portion size for the se- You can assign names to different drinks
lected components. within a User profile.
ĺ
The combination programmed in and the Select the User profile you want.
total portion size will now be dispensed
every time that particular drink is selected.
Tip: You can cancel portion size program-
Stop " is visible in the display.
ming while "
Settings
Creating a drink Changing settings
ĺ
ĺ
ĺ OK " to save the setting.
Create drink " and select the re- Touch "
Touch " Settings "  in the main menu.
Select "
ĺ
quired drink from the standard drinks. Tip: Touching  takes you back to the
ĺ Touch the option you want and change
previous menu.
Change the drink parameters according the setting as required.
to your tastes. Save the quantities of the
individual drink components.
The editor will open in the display.
ĺ
Enter a name for the new drink and
Menu option Available settings Notes
touch " Save ".
Language deutsch, and other languages Tip: If you select the wrong language by mistake, you can find the "
If you have already allocated a drink, you
Country flag symbol .
can:
Time of day Display (Off / On / Night dimming) Depending on which option you select, the machine may use more energy. A message appears in the
– Change drink
Clock type (Analogue / Digital) display to inform you of this.
– Delete drink
Clock format (12 h / 24 h)
You can save a maximum of 9 drinks in a
Set
profile.
Date Year / Month / Day
Timer Timer 1 (Switch on at / Switch off at / Switch For "
MyMiele off after) week must be allocated.
Timer 2 (Switch on at / Switch off at)
You can display drinks you make frequent-
Eco mode On / Off
ly, drinks from User profiles and mainte-
nance programmes in the MyMiele screen. Lighting Brightness (Appliance switched on or
switched off)
Opening the MyMiele  menu Switch off after
ĺ
Start screen Main menu
Touch "MyMiele"  in the main menu.
MyMiele " and add Drinks menu
You can now configure "
entries (" Add entry "). User profiles
MyMiele
Adding an entry
Info Number of drinks
No. of portions until appliance needs descaling " / " No. of portions until brew unit needs degreasing "
"
You can select options listed in the follow-
ing categories: System lock On / Off When the system lock is activated, the "
– Drinks  Water hardness Soft / Medium / Hard / Very hard
– User Profiles  Display brightness Set
– Maintenance 
Volume Buzzer tones
ĺ
Add entry ".
Touch "
Keypad tone
Showroom programme Demo mode (On / Off) This function is intended for presenting the appliance in Miele Centers or retail stores. Do not activate
this function for domestic use.
If you have already added some entries,
you can carry out the following under
Plate warmer Automatic / On / Off
Edit ":
"
Spout adjustment On / Off The height of the central spout cannot be manually adjusted.
– Sort entries, or
Factory default settings Settings Please note that the following settings will not be reset: Language, Time of day, Number of drinks dis-
– Delete entries. pensed, User profiles
MyMiele
Mains water On / Off (Only for CVA 6805)
Quick Start Guide
Built-in coffee machine
Language " option by following the
Switch on at " and " Switch off at " to be set, the timer must be activated and at least one day of the
Switch on at " option for the timer cannot be selected.
These short instructions are not a substitute for the Operating and installation in-
structions booklet supplied with your coffee machine. Please read the Operating
and installation instructions booklet supplied with your machine before using it for
the first time and take note of the Warning and Safety instructions, as well as the full
descriptions on how to use your machine.
en - AU, NZ
M.-Nr. 09 857 271