Samsung SCH-a950 Series User Manual page 107

On Power Up
•
power up the phone.
4. Press
option.
Edit Lock Code
The default lock code is the last four digits of your phone
number. Edit Code allows you to change this code to a lock
code of your preference.
1. In standby mode, press
navigation key to highlight
Press
display.
2. Press
code. The default lock code is the last four digits of your
telephone number.
3. Press
and Location. Use the navigation keys to highlight your
choice and press
4. At the "Enter New Lock Code" prompt, enter the new
lock code. You're prompted to confirm the new lock
code.
5. "Device or Location Lock Code Changed" message
appears in the display confirming that your lock code has
been changed.
Note: Your phone does not allow you to view the lock code for obvious
security reasons. If you change the lock code, be sure to write down or
memorize the new code.
: The Lock Code is required whenever you
to perform the function for the highlighted
System. The System menus are listed in the
Security. You're prompted to enter the lock
Edit Code. Two options are available Device
.
Section 8: Changing Your Settings
System Settings
MENU, use the right
SETTINGS & TOOLS.
107