Miele KFN 9753 iD Operating And Installation Instructions page 9

Adjusting the door hinges
Before installing the appliance, you will
need to decide which side of the door
you would like hinged. For a
left-handed door hinge, follow the
instructions below.
Tools needed:
– a Philips head screwdriver,
– a flathead screwdriver,
– various sizes of Torx screwdrivers,
– an open-ended wrench.
^ Open the appliance doors.
^ Using a flathead screwdriver, lift and
remove the covers a, b and c, as
well as the plugs d.
42
^ Slightly loosen the fastening screws
e at the top, middle and bottom.
^ Slide the appliance doors outwards
and unhinge them.
^ Completely unscrew the fixing
screws e.
^ Loosely screw them into the top,
middle and bottom of the opposite
side of the appliance.
^ Pull the pins up and out of the
hinges (if necessary).