Testing Equipment - Compaq Presario 1200 series User Manual

8-12 S
ERVICE
The Test tab has the following main regions: Types of Test,
Test mode, an Information Window, and a Component List
(under the Type of Test box). The Component List resembles
Windows Explorer: Click the
then the component for information about it. The information
window may show further tests that can be performed on
certain components. You can request any or all of the subtests.

Testing Equipment

To run a test, complete the following steps:
1. Click the Test tab.
2. Choose the type of test: Quick, Complete, or Custom.
In Custom, you will need to check the boxes in the
Component List for each test you want.
3. Select Interactive mode or Unattended mode.
4. Click the Begin Test button at the bottom of the window.
The Status tab automatically replaces the Test tab on your
window. You can follow the progress of individual tests on
this window.
When the tests are complete, the progress bar in the Status
window is green if the test is successful and red if the test
fails. The lower part of the Status tab provides details of the
tests that are complete.
The Long tab lists all the tests and also provides information
about the number of times each test was run, the time taken
for the test, and the number of errors detected. You can save
this information by clicking the Save button at the bottom of
the window.
The Error tab provides details about the errors detected,
including error codes. These error codes reveal useful
information that a Compaq technician uses to advise you
on how to correct problems with your Notebook.
+
to open a component folder,
P N B
RESARIO OTEBOOK EYOND
S - G
ET UP UIDE
1200 S
ERIES