In these operating instructions the designation “the ap- pliance” always refers to the TE DRS-M dust removal Always keep these operating instructions to- module. gether with the appliance.
The TE DRS‑M dust removal module is an accessory for authorized, trained personnel. This personnel must be in- use with the Hilti TE 7, TE 7‑A, TE 7‑C, TE 6‑S and TE 6‑C formed of any special hazards that may be encountered.
Accordingly, the container should be emptied regularly. CAUTION Wear respiratory protection when doing this. Observe the operating instructions for the Hilti rotary hammer used. Use the appliance only in conjunction NOTE with the power tools listed in section 2. Failure to...
Replacing the suction head 8 Disposal Most of the materials from which Hilti tools or appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking back old tools and appliances for recycling.
86916 Kaufering We declare, on our sole responsibility, that this product Deutschland complies with the following directives and standards: 2006/42/EC, EN ISO 12100. Hilti Corporation, Feldkircherstrasse 100, FL‑9494 Schaan Paolo Luccini Jan Doongaji Head of BA Quality and Process Man-...
Need help?
Do you have a question about the TE DRS-M and is the answer not in the manual?
Questions and answers