Installation; Powered Subwoofer - Kicker Bass Station PT250 User Manual

Authorized KICKER Dealer:
Purchase Date:
Serial Number:
Your space-saving KICKER BassStation™ Powered Enclosure offer the quickest and easiest way to add a
subwoofer to your vehicle. This system has been meticulously fi ne-tuned by KICKER engineers to deliver
astounding performance and sound without the time-consuming setup required for a typical amp-sub upgrade.
Model:
Subwoofer | inches [cm]
RMS Power @ 14.4V [10% THD]
RMS Power @14.4V [1% THD]
Net Weight | lbs. [kg]
Height | inches [mm]
Width | inches [mm]
Depth at top | inches [mm]
Depth at base | inches [mm]
Frequency Response ± 1dB
Signal-to-Noise Ratio
Crossover
Subsonic Filter
Phase Switch
Input Sensitivity
KickEQ Bass Boost
Remote Bass
Enclosure Type

INSTALLATION

Mounting: Choose a structurally sound location to mount your KICKER powered subwoofer enclosure. Carefully
check the areas where the mounting straps will be placed. Make sure the mounting screws will not puncture
the gas tank/brake lines/wiring or interfere with any mechanical parts on the underside of the mounting surface.
Choose a location that allows at least 4" (10cm) of open ventilation for the amplifi er. If possible, mount the
enclosure in the climate-controlled passenger compartment.
2
2013 PT250 Rev B.indd 2 2013 PT250 Rev B.indd 2
ENCLOSURE Owner's Manual
MODEL: PT250
BassStation™

POWERED SUBWOOFER

PT250
10 [25]
100W
90W
18 [8.2]
12-13/16 [325]
19-5/16 [490]
4-11/16 [118]
7-11/16 [195]
25–120Hz
>95dB
variable 50–120Hz, 12dB/octave lowpass
24dB/octave @ 25Hz
0° / 180°
low level: 125mV–5V
high level: 250mV–10V
variable to +6dB @ 40Hz
included
sealed
3/19/2013 3:07:36 PM 3/19/2013 3:07:36 PM