Settings Menu; Am/Fm Radio Operation; Bluetooth Operation; Usb Operation - MTX Thunder sports MUDSYS41 Owner's Manual

SETTINGS MENU

Press and hold the MODE button for 2 seconds and then press the MODE button to cycle through the
settings menu.
• BT Pair - Use this function to pair a Bluetooth enabled device to the unit. Please see the
"Bluetooth Operation" section for pairing instructions.
• Bass - Adjust the bass level using the +/- buttons. Range is -7 to +7, default setting is 0.
• Treble - Adjust the treble level using the +/- buttons. Range is -7 to +7, default setting is 0.
• Balance - Adjust the balance between the left and right speakers using the +/- buttons.
The L7 setting diverts all audio to the left side only and R7 diverts all audio the right side only.
• Fader - The fader function will decrease the output from the entire system. This should not need to
be adjusted.
• Loud - This turns the loudness control On and Off. The loudness will boost the low frequencies at
low volumes.
• EQ - Use the +/- buttons to choose an EQ setting between, Flat, Classic, Pop, and Rock. Default
setting is Rock.
• Area Tuning - Use the +/- buttons to select the appropriate AM/FM tuning band for your
location between USA and European frequency.
• Time Format - Use the +/- buttons to select a time format between 12 and 24 hour styles.

AM/FM RADIO OPERATION

Press the Band button to select between AM and FM. Tap the APS button to scan to the next
strongest station. Hold the APS button (2 second hold) to use the APS feature to auto program the
stations. The APS will start to auto program from the current FM station the radio is tuned to. If using
the APS feature with programmed stations, the
and hold the or button to enable manual tuning mode and use those same controls to scan
through the preset stations. Note: Holding the
quickly through the frequency band until the button is released.

BLUETOOTH OPERATION

This unit supports Bluetooth for wireless music streaming from Bluetooth enabled devices including
iPhone and Android smartphones and tablets.
® ®
Connect to your device using the following steps:
• Press MODE for 2 seconds, BT PLAY will be displayed.
• Hold MODE for 2 more seconds and "Pairing" will be displayed.
• Select "MTX SOUNDBAR" from the list of available Bluetooth devices.
• The device will then pair to the unit.
Note: Some devices may require a pass code. Input passcode, "0000", if prompted and the
connection will automatically be made.
Bluetooth Audio function:
• The Track Forward and Track Back buttons can select the track playing on the device.
Holding the Track Button for 2 seconds will scan through the music tracks on the device.
• The Play/Pause button will Play/Pause the music track playing on the device.

USB OPERATION

An external USB memory stick can be used to play music through the unit if desired. Insert a USB
memory stick into the USB input connector. Using the "Mode" button select USB. The unit will read
the mp3 files on the memory stick automatically. Press the
song. Press and hold the
the button to pause/resume the selected song. Phones and other devices will be charged when
connected through USB.
/
or
or for 2 seconds to fast forward/backward the selected song. Press
M T X . C O M
will scan through the preset stations. Press
after the unit is in manual mode will scan
or button to play the next/previous
5