iBall Andi4 IPS Velvet User Manual page 37

adapter that will connect to the modem router wirelessly is a client. The client must
support a WPS PIN, and must have a WPS configuration utility.
Wi-Fi Direct: Using Wi-Fi direct feature, you can transfer data from one device to
another through Wi-Fi without the need of an access point.
Advanced: This option contains the following features:
1. Network notification: By default, when Wi-Fi is on, you receive notifications in the
Status bar when your device detects an open Wi-Fi network. Uncheck this option to
turn off notifications
2. Keep Wi-Fi during sleep: To conserve mobile data usage, your device stays
connected to Wi-Fi when the screen goes to sleep.
3. Wi-Fi Optimization:To minimize the battery usage when Wi-Fi is ON.
4. MAC address: The Media Access Control (MAC) address of your device when
connected to a Wi-Fi network.
5. IPv4 address: The Internet Protocol (IP) address assigned to the device by the Wi-
Fi network you are connected to (unless you used the IP settings to assign it a static
IP address)
37