Section 5. Care Of Your Machine; Dismantling And Assembling; Shuttle Race Unit; Cleaning The Feed Dog - ELNA Sew Fun Instruction Manual

t
r
u

SECTION 5. CARE OF YOUR MACHINE

Dismantling and Assembling

Shuttle Race Unit

Note :Turn off the power switch and/or unplug the
machine.
w
To dismantle shuttle race unit:
Raise the needle to its highest position and open the
hook cover.
Open the hinged latch of bobbin case and take it out of
q
the machine.
Open the hook race ring holders and remove the shuttle
race ring.
Remove the hook.
* Clean the hook race with a brush and a soft dry cloth.
q Bobbin case
w Shuttle race ring holder
e Shuttle race ring
e
r Shtuule
t Shuttle race
To assemble shuttle race unit:
Shuttle the hook by the center pin and fit it carefully
back into the shuttle race, forming a perfect circle
with the shuttle driver.
y
Attach the shuttle race ring making sure the bottom
pin fits into the notch.
Lock the shuttle race ring by turning the holders
back into position. Insert the bobbin case.
y Pin
u Notch

Cleaning the Feed Dog

Turn off the power switch and/or unplug the machine
before cleaning the feed dog.
Remove the needle and the presser foot.
Remove the needle plate set screw and remove
the needle plate.
With a brush, clean out dust and lint clogging the
feed dog teeth.
Reset the needle plate.
25
WARNING: