Samsung 460 Installation Manual page 22

¦ Plug & Play
The Hotel Plug & Play function automatically performs the Hotel mode selection, Country Setup, Clock Setup and
Picture mode Setup when the TV starts for the first time.
– Hotel Plug & Play is only available when the power is turned ON for the first time.
– After setting up the TV first and running Clone TV to USB.
– Next, the TV only needs to exit Hotel Plug & Play, connect to the USB device, then run Clone USB to TV.
Local Set
Change Local Set if Located in North America, Latin America and Europe.
In other regions, Please press SKIP button move to the next step.
Current Localset : EU
Change Skip
If Skip is selected
Easy Set up
If you select this,Easy
setup will be started.
There are Essential
Standalone Setup
Details, Channel Scan,
c Clock and Terms in Easy
Setup.
(Continue Setup)
Standalone Only
(End Setup)
If Standalone
Setup is selected
Select your Language
Select your language to start the on screen setup.
English
Press the ▲▼◄►
Eesti
buttons to move the
highlight.
Suomi
Press the enter button to
select.
Français
Deutsch
The Language Setting will be applied to Main Menu and not Plug and Play.
MAIN : Option, MODE : DTV, RES : NOTSUPPORT, Standalone Menu
Hospitality Mode Standalone
OFF
SI Vendor
Power On
Channel
Menu OSD
Clock
Music Mode
Remote Jack Pack
External Source
Eco Solution
Logo/Message
Cloning
REACH Solution
Security
System
When complete, power down TV.
When pressing OK button, the
hotel menu appears as shown on
the left. Complete the hotel menu
settings, and then reset the TV.
You can use your TV.
22
English
[HC460-465-EU]Install-Guide-X0ENG.indd 22
If Standalone
Only is selected
Select your information in the categories below.
Country
Picture Mode
Next
<Depending on Region, this step
may not exist.> After selecting
the country in the country menu,
some models may proceed with an
additional option to setup the pin
number.
If you forget the PIN code, in the
Hotel menu, select the SERVICE
→ TV Reset. And set the pin code
again in the Plug & Play.
TV Setup Complete!
Your TV is now ready to use.
Ok
Standalone mode is set
Configure your TV
Select the country that
you're in now
Bulgaria
Standard
* It may differ depending
on the model.
* It may differ
depending on
the model.
TV will enter the RF mode
Auto Tuning
To receive channels, configure the options below Select the connected aerial
that you want to use to get
then select Scan.
channels.
Aerial Air
Channel Type Digital & Analogue
Scan
Auto Tuning
Auto tuning is finding channels for you...
C40 625MHz
2%
Digital 0
TV 0
Radio 0
Data/Other 0
Analogue 0
Stop
Auto Tuning
Auto Tuning Complete.
Digital 0
TV 0
Radio 0
Data/Other 0
Analogue 0
Change Settings Scan Again
Clock
You can adjust your time to set DST, Time Zone and
Set current date and time
clock mode
Clock Mode Auto
Date --/--/----
Time --:--
Time Zone Auto
DST Off
--:--
2014-07-14 10:04:37